The Effect of Aerodynamic Design on Fuel Efficiency in Commercial Vehicles
Abstract
The increasing demand for fuel efficiency in commercial vehicles has prompted extensive research into aerodynamic designs. Improved aerodynamics can significantly reduce drag, leading to enhanced fuel economy and lower operational costs for commercial fleets. Understanding the relationship between aerodynamic design and fuel efficiency is critical for optimizing vehicle performance. This research aims to evaluate the impact of various aerodynamic designs on the fuel efficiency of commercial vehicles. The study focuses on analyzing the performance differences between conventional and streamlined vehicle shapes. An experimental approach was employed, utilizing computational fluid dynamics (CFD) simulations alongside real-world driving tests. Several vehicle models with different aerodynamic features were tested under controlled conditions. Fuel consumption data was collected and analyzed to assess the relationship between design modifications and fuel efficiency. The findings indicated that streamlined designs improved fuel efficiency by an average of 15% compared to conventional models. Vehicles with enhanced aerodynamic features experienced reduced drag coefficients, leading to significant fuel savings during operation. The results demonstrated a clear correlation between aerodynamic optimization and improved fuel economy. The research highlights the crucial role of aerodynamic design in enhancing fuel efficiency for commercial vehicles. These findings emphasize the importance of integrating aerodynamic considerations into vehicle design processes.
Full text article
References
Bae, H.J. 2022. “Scientific Multi-Agent Reinforcement Learning for Wall-Models of Turbulent Flows.” Nature Communications 13 (1). https://doi.org/10.1038/s41467-022-28957-7.
BAO, C. 2021. “Integrated Method of Guidance, Control and Morphing for Hypersonic Morphing Vehicle in Glide Phase.” Chinese Journal of Aeronautics 34 (5): 535–53. https://doi.org/10.1016/j.cja.2020.11.009.
Bravo-Mosquera, P.D. 2022a. “Unconventional Aircraft for Civil Aviation: A Review of Concepts and Design Methodologies.” Progress in Aerospace Sciences 131 (Query date: 2024-11-10 01:44:25). https://doi.org/10.1016/j.paerosci.2022.100813.
———. 2022b. “Unconventional Aircraft for Civil Aviation: A Review of Concepts and Design Methodologies.” Progress in Aerospace Sciences 131 (Query date: 2024-11-10 01:44:25). https://doi.org/10.1016/j.paerosci.2022.100813.
Chen, W.H. 2021. “Efficiency Improvement of a Vertical-Axis Wind Turbine Using a Deflector Optimized by Taguchi Approach with Modified Additive Method.” Energy Conversion and Management 245 (Query date: 2024-11-10 01:44:25). https://doi.org/10.1016/j.enconman.2021.114609.
CHU, L. 2022. “Design, Modeling, and Control of Morphing Aircraft: A Review.” Chinese Journal of Aeronautics 35 (5): 220–46. https://doi.org/10.1016/j.cja.2021.09.013.
Dhawan, S. 2021. “SSII: Secured and High-Quality Steganography Using Intelligent Hybrid Optimization Algorithms for IoT.” IEEE Access 9 (Query date: 2024-11-10 01:44:25): 87563–78. https://doi.org/10.1109/ACCESS.2021.3089357.
DING, Y. 2022. “Review of Control and Guidance Technology on Hypersonic Vehicle.” Chinese Journal of Aeronautics 35 (7): 1–18. https://doi.org/10.1016/j.cja.2021.10.037.
Franco, M.C. 2021. “Characteristics of NH3/H2/Air Flames in a Combustor Fired by a Swirl and Bluff-Body Stabilized Burner.” Proceedings of the Combustion Institute 38 (4): 5129–38. https://doi.org/10.1016/j.proci.2020.06.141.
Hu, Y. 2021. “Hovering Efficiency Optimization of the Ducted Propeller with Weight Penalty Taken into Account.” Aerospace Science and Technology 117 (Query date: 2024-11-10 01:44:25). https://doi.org/10.1016/j.ast.2021.106937.
Huang, H. 2022. “An All Servo-Driven Bird-Like Flapping-Wing Aerial Robot Capable of Autonomous Flight.” IEEE/ASME Transactions on Mechatronics 27 (6): 5484–94. https://doi.org/10.1109/TMECH.2022.3182418.
Huang, Y. 2021. “A Review of Strategies for Mitigating Roadside Air Pollution in Urban Street Canyons.” Environmental Pollution 280 (Query date: 2024-11-10 01:44:25). https://doi.org/10.1016/j.envpol.2021.116971.
Johnson, W. 2022. “NASA Concept Vehicles and the Engineering of Advanced Air Mobility Aircraft.” Aeronautical Journal 126 (1295): 59–91. https://doi.org/10.1017/aer.2021.92.
Kou, J. 2021. “Data-Driven Modeling for Unsteady Aerodynamics and Aeroelasticity.” Progress in Aerospace Sciences 125 (Query date: 2024-11-10 01:44:25). https://doi.org/10.1016/j.paerosci.2021.100725.
Lai, Z. 2021. “A Hybrid Piezo-Dielectric Wind Energy Harvester for High-Performance Vortex-Induced Vibration Energy Harvesting.” Mechanical Systems and Signal Processing 150 (Query date: 2024-11-10 01:44:25). https://doi.org/10.1016/j.ymssp.2020.107212.
Li, J. 2022. “Machine Learning in Aerodynamic Shape Optimization.” Progress in Aerospace Sciences 134 (Query date: 2024-11-10 01:44:25). https://doi.org/10.1016/j.paerosci.2022.100849.
Li, J.Y. 2021. “Data-Driven Evolutionary Algorithm with Perturbation-Based Ensemble Surrogates.” IEEE Transactions on Cybernetics 51 (8): 3925–37. https://doi.org/10.1109/TCYB.2020.3008280.
Martins, J.R.R.A. 2022. “Aerodynamic Design Optimization: Challenges and Perspectives.” Computers and Fluids 239 (Query date: 2024-11-10 01:44:25). https://doi.org/10.1016/j.compfluid.2022.105391.
Meng, X. 2021. “Short Term Associations of Ambient Nitrogen Dioxide with Daily Total, Cardiovascular, and Respiratory Mortality: Multilocation Analysis in 398 Cities.” The BMJ 372 (Query date: 2024-11-10 01:44:25). https://doi.org/10.1136/bmj.n534.
Nash, R. 2021. “Wind Turbine Wake Control Strategies: A Review and Concept Proposal.” Energy Conversion and Management 245 (Query date: 2024-11-10 01:44:25). https://doi.org/10.1016/j.enconman.2021.114581.
Nejad, A.R. 2022. “Wind Turbine Drivetrains: State-of-the-Art Technologies and Future Development Trends.” Wind Energy Science 7 (1): 387–411. https://doi.org/10.5194/wes-7-387-2022.
Pritchett, N. 2022. “Exposure to Outdoor Particulate Matter Air Pollution and Risk of Gastrointestinal Cancers in Adults: A Systematic Review and Meta-Analysis of Epidemiologic Evidence.” Environmental Health Perspectives 130 (3). https://doi.org/10.1289/EHP9620.
Raul, V. 2021. “Surrogate-Based Aerodynamic Shape Optimization for Delaying Airfoil Dynamic Stall Using Kriging Regression and Infill Criteria.” Aerospace Science and Technology 111 (Query date: 2024-11-10 01:44:25). https://doi.org/10.1016/j.ast.2021.106555.
Renganathan, S.A. 2021. “Enhanced Data Efficiency Using Deep Neural Networks and Gaussian Processes for Aerodynamic Design Optimization.” Aerospace Science and Technology 111 (Query date: 2024-11-10 01:44:25). https://doi.org/10.1016/j.ast.2021.106522.
Sathish, T. 2021. “Fluid Flow Analysis of Composite Material-Based Wind Turbine Blades Using Ansys.” International Journal of Ambient Energy 42 (12): 1396–99. https://doi.org/10.1080/01430750.2019.1608861.
Tugnoli, M. 2021. “Mid-Fidelity Approach to Aerodynamic Simulations of Unconventional VTOL Aircraft Configurations.” Aerospace Science and Technology 115 (Query date: 2024-11-10 01:44:25). https://doi.org/10.1016/j.ast.2021.106804.
Yang, K. 2021. “Stochastic Analysis of a Galloping-Random Wind Energy Harvesting Performance on a Buoy Platform.” Energy Conversion and Management 238 (Query date: 2024-11-10 01:44:25). https://doi.org/10.1016/j.enconman.2021.114174.
Yang, T. 2023. “Long-Term Exposure to Multiple Ambient Air Pollutants and Association with Incident Depression and Anxiety.” JAMA Psychiatry 80 (4): 305–13. https://doi.org/10.1001/jamapsychiatry.2022.4812.
Zhang, J. 2021. “Aeroelastic Model and Analysis of an Active Camber Morphing Wing.” Aerospace Science and Technology 111 (Query date: 2024-11-10 01:44:25). https://doi.org/10.1016/j.ast.2021.106534.
Zhang, W. 2021. “Prospect of Artificial Intelligence Empowered Fluid Mechanics.” Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica 42 (4). https://doi.org/10.7527/S1000-6893.2020.24689.
Zhang, X. 2021. “Multi-Fidelity Deep Neural Network Surrogate Model for Aerodynamic Shape Optimization.” Computer Methods in Applied Mechanics and Engineering 373 (Query date: 2024-11-10 01:44:25). https://doi.org/10.1016/j.cma.2020.113485.
Zhou, Y. 2021. “Digital-Twin-Driven Geometric Optimization of Centrifugal Impeller with Free-Form Blades for Five-Axis Flank Milling.” Journal of Manufacturing Systems 58 (Query date: 2024-11-10 01:44:25): 22–35. https://doi.org/10.1016/j.jmsy.2020.06.019.
Zuo, H. 2021. “Effects of Different Poses and Wind Speeds on Wind-Induced Vibration Characteristics of a Dish Solar Concentrator System.” Renewable Energy 168 (Query date: 2024-11-10 01:44:25): 1308–26. https://doi.org/10.1016/j.renene.2020.12.127.
Authors
Copyright (c) 2025 Carlos Fernandez, Siti Shofiah, Ardi Azhar Nampira

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.